The 3M Peltor LiteCom Pro III utilizes Bluetooth® Multipoint Technology, allowing the headset to pair with two Bluetooth® devices simultaneously. The headset prioritizes & coordinates activities from each connected device, which gives the user flexibility to switch between phone calls, 2-way radio communications, or music with ease.
We're going to show you how to easily pair your Bluetooth® devices with the Litecom Pro III in under a minute.
How to Pair Your Devices
- Power on your headset by holding the power button down for about 2 seconds.
- Short press the power button (1) about 3 times until you hear the headset say "Bluetooth® Pairing" and then press the plus button (2) to enable Bluetooth® pairing mode.
- On your cell phone or Bluetooth® enabled device, enter the Bluetooth® list under settings.
- After a few seconds you should see "WS Litecom Pro III" appear under other devices. Tap on the name. If the device has already been paired with your headset, you will find it under My Devices
- If paired successfully, you will hear the headset say "pairing complete"
Upon power up, your headset will now automatically connect to your Bluetooth® device. To disconnect your device from the headset, go into your devices Bluetooth® list, and find WS LiteCom Pro III. Click the icon next to connected. This brings up more options. You can choose either "disconnect" or "forget device".
-
Disconnect means to temporarily remove the connection between the phone and headset but still keep it in your connections to pair later.
- Forget Device means completely remove the device from the headset. You must follow the pairing steps above to re-pair your device if you want to use it again.
Pairing a second device
To pair a second Bluetooth® enabled device to your Litecom Pro III, follow the same instructions as above. Now two devices will connect to your headset and use Multipoint Technology to filter through each device when needed.
Notes:
- By default, the headset VOX functionality is disabled when taking a phone call via a Bluetooth® connection. Once the call has ended, VOX will automatically switch back on
- To transmit on the two-way radio during a phone call, press the Push to Talk (PTT) button
- If the PTT button is pressed during a phone call, your voice will only transmit through the two-way radio & not to the phone call
- To activate VOX during a phone call, double press the PTT button. Your voice will then be transmitted to both the two-way radio and the phone call.
6 comments
First Source Wireless
Hey Linus,
Please contact 3M Customer Service at 1 (888) 364-3577. They can help you find the best solution.
Linus
Hi. i got a pair of peltor ws litecom pro iii and the device wont show up on my phone even if bluetooth pairing is on
Scott Huntsberger
Can I pair this with a 2nd communications radio instead of a cell phone?
First Source Wireless
Daniel,
I haven’t heard anything regarding the battery status not working on the litecom headsets before. After seeing that you did a factory reset, your best bet would be to contact 3M support and see if they can help fix this issue or get you help if it’s still under warranty. The warranty period is 1 year I believe.
As far as pairing to SENA, I have not heard whether this is possible. I’m not sure what device you have from SENA. If it has any Bluetooth pairing capabilities, you can try pairing them but the headset mostly works with just phones.
Daniel Kurnick
Out of the box, two pairs of lit com plus have not given battery status other than „battery status unknown“ and no low battery announcement.
I have been using each with out much trouble, charging battery after 15 hours or whenever speakers surge static without transmission (this has been my only indicator, and seems to happen at normal battery life intervals)
What is the remedy for this? Warranty?
I have tried factory reset.
Off topic; Is their a way to pair to sena?
Bruce Gerhardt
I cannot pair my Peltor Live.com III with any of my Galaxy Phones. I need to be able to pair with the Galaxy S20. Is there a firmware update for the headset? I also need to replace the batteries on three headsets, and I need 3 extra transformers/120 chargers. Can you help? Thanks